Selecting vehicle antenna
Specifies if the GPS receiver has an internal (built into the receiver) or external antenna. The default setting is the internal antenna.
To set the antenna type:
- Select: Vehicle / Antenna.
If External is selected, enter the measurements indicating the position of the antenna:
Forward offset relative to SRC-40
Enter the forward distance from the centre of the SRC-40 receiver to the centre of the antenna (enter a negative value if the antenna is behind).
Right hand offset relative to SRC-40
Enter the distance to the right between the centre of the SRC receiver and the centre of the antenna (use a negative number if the antenna is to the left of the SRC receiver).
Height
Enter the height of the antenna above ground level and confirm.