Introductory guide

To configure the system:

1. Connect a GPS receiver to the console.
2. Access the Settings screen.
3. Select System / GPS, then select:
   • The GPS receiver used.
   • The required correction source.
4. Once the system receives GPS data for the first time, the user is asked to set the local time. Accept the current time or, if necessary, set the correct local time.
5. Select Vehicle / New and create a new vehicle profile, selecting the most appropriate default model profile. Check and, if necessary, modify the vehicle geometry.
6. Select Implement / New and create a new implement profile by selecting the appropriate implement type. Check and, if necessary, modify the implement geometry.
7. Access the Operations screen.
8. Access the Field Selection screen and create a new client, farm and field.
9. Access New Job and create a new job. The system is now functional.
10. To activate the autosteer function, access: Settings, System / Functions / Guidance / AUTOSTEER.
11. To activate the Automatic section control function, access the Settings screen and:
    • Creating or loading an implement.
    • In the menu: Implement/ Section control/ Sections, configure the number of sections and the respective width.
    • If required, modify the section timer settings in: Implement / Section control / Timer.
    • If required, select a physical or virtual control panel in: Implement / Section control / Section switching .
12. Enable the Automatic Section Control function in: System / Functions / Implement / AUTOMATIC SECTION CONTROL.
13. To control functions enabled from the Operations screen, use the buttons in the navigation bar.